Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Orgalloy® LT 4060 ES BLACK T6L - PA6... - ARKEMA

Check here, which other Orgalloy LT datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Orgalloy® LT 4060 ES BLACK T6L resin is a polyamide alloy especially designed for extrusion blow molding. This black grade offers an excellent thermal resistance, cold impact performance and flexibility.

Main applications:

• Automotive air intake ducts (clean air duct and outside intercooler tube)

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Caratteristiche Fisiche	secco/cond	Unitá	Norma del test
ISO Data
Indice di fusione di volume, MVR	0.5 / *	cm³/10min	ISO 1133
Temperatura	235 / *	°C	-
Carico	5 / *	kg	-

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	570 / 230	MPa	ISO 527
Carico unitario al 50% di deformazione	22 / 16	MPa	ISO 527
Deformazione a rottura	>50 / >50	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	79 / 78	kJ/m²	ISO 179/1eA
Durezza Shore D	50 / *	-	ISO 7619-1

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	220 / *	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 0.45 MPa	60 / *	°C	ISO 75-1/-2
Temp.di rammollimento Vicat, B	62 / *	°C	ISO 306
Reaz. al fuoco spess.nom. 1.5mm	HB / *	class	IEC 60695-11-10
Spessore provato	1.6 / *	mm	-
Reazione al fuoco a spessore h	HB / *	class	IEC 60695-11-10
Spessore provato	3.2 / *	mm	-

Proprietà Elettriche	secco/cond	Unitá	Norma del test
ISO Data
Res. Alle correnti striscianti superficiali	* / 600	-	IEC 60112

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	5 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	1.1 / *	%	Sim. alla ISO 62
Massa volumica	1040 / 1040	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Soffiaggio

Forma fisica disponibile

Pellet, Nero

Caratteristiche speciali

Stabilizzato o stabile alla luce, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Altre informazioni

Soffiaggio

Processing conditions:
- Drying time (only necessary for bags opened for more than two hours): 4-8 hours at 80°C
- Extrusion melt temperature (min-recommended-max): 250-260-270°C 

Resistenza chimica

Acidi
	Acido solforico (5% da massa) (23°C)
Basi
	Soluzione dell' idrossido del sodio (1% da massa) (23°C)
Idrocarburi
	Toluene (23°C)
Chetoni
	Acetone (23°C)
Soluzioni saline
	Soluzione del cloruro dello zinco (50% da massa) (23°C)
Altri
	Glicol etilenico (50% da massa) in acqua (108°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.